Shenzhen Skoocom Precision Rubber Products Co.,Ltd

Material
Material

XNBR

VMQ

SBR

NR

NBR

IIR

FKM

EPDM

CR

AU/EU

FVMQ

Customized material

AU/EU


	Polyurethane (AU, EU) The millable Polyurethane rubbers are distinguished two types; one is polyester urethane (AU), the other is polyether urethane (EU). AU type urethanes have outstanding oil, fuel and solvent resistance but can be attacked by hydrolysis, EU type urethanes are not attacked by hydrolysis and still offer a fuel and oil resistance comparable to low ACN ( 18~22% ACN) nitriles or HNBRs. Any types polyurethane all have excellent wear resistance, high tensile strength and high elasticity in comparison with any other elastomers. We also can offer any type thermoplastic urethane (TPU). SERVICE TEMPERATURE The service temperature of PU is -40℃ to 80℃, shortened lifetime up to 100℃. HARDNESS60 to 93 Shore A are available. COLOR Black, transparent, green, orange are available, or any assigned color from customers. APPLICATION Polyurthane usually are applied in mechanical industry, especially in the place requires material must have higher wear resistance and higher strength. Some applying environment will happen moisture condensing on the surface of rubber seal, which will cause hydrolysis of AU, so choosing EU is better. But EU doesn’t resist well to oil, the lubricant must use higher aniline point oil.

TEL：0755-27328342 FAX：0755-27337116 E-mail：kate.fang@skoocom.com
ADD：Floor 1，Building 21, Hualun Sci-Tech Park, 1ST Industrial Zone, Fenghuang Village, Fuyong Town, Baoan District, Shenzhen City, Guangdong Province， China
Copyright©2003-2025 Copyright：Shenzhen Skoocom Precision Rubber Products Co.,Ltd 粤ICP备12081804号

	Sales
	Technology
	Kate.fang